Mis kood täpselt on? Kas ikka MAP nässus või hoopis juhtmed katkestuses/lühises?
sensorini jõudmine:
There's about 14 bolts around the perimeter(engine cover). Those hold the cover on. 2 are hidden under the plug wire track.
There are also 4 bolts in the middle that you don't remove. They hold the intake on.
The MAP sensor is in the middle on the right hand side(facing from the front of the car) Its a rectangular box that clips-in to the gasket / fuel rail assy with wires going to it.
Torque is only 11 to 14 ft lbs. The bolts will seat before the rubber grommets crush - but if your grommets are old, pieces may break off.
P032 (E032) ................................................. Open MAP Sensor Signal
elik mina kõigepealt kontrolliks juhtmed üle - open = katkestus.
Ja vaata ka anduri enda takistust - kas näitab midagi või ei. Kui ei näita, siis idee järgi jah andur pees.