remondimanuaali pead ikkagi tudeerima:
As you know there are several rods that can be adjusted, the TV rod, the throttle control rod from the carb and the one going to the pedal and finally the throttle return. Any minor adjustment tweaks made to either one of these it will affect the others.
Besides the steps from the manual under the Fuel and Exhaust, and Hydramtic sections there are also a few tips in the Servicesman that could help in getting these set properly.
Accelerator to carpet clearance
Manus:
1956 Cad Serviceman No 6 Jun 1956-3.jpg [ 226.45 KB | Vaadatud 23641 korda ]
Alternate adjustment for throttle return.
Elik kasti ja gaasihoovastik peab reguleeritud saama, muidu pole ka õiget toimimist.
Manus:
1956 Cad Serviceman No 6 Jun 1956-2.jpg [ 213.62 KB | Vaadatud 23641 korda ]
Any of these adjustments should not force the rods to either push or pull the throttle lever at the carb. I think you are almost there with the fine tuning, just a matter of getting those rods set correctly.